Home › Engine / Hybrid System › 3ZR-FAE (ENGINE CONTROL) › CAMSHAFT OIL CONTROL VALVE
RM32H0E _51 Engine / Hybrid System _059607 3ZR-FAE ENGINE CONTROL _0293869 CAMSHAFT OIL CONTROL VALVE A

3ZR-FAE ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  REMOVAL  


PROCEDURE

Hide 11212 1.REMOVE NO. 2 CYLINDER HEAD COVER

a.
A393538C01
0,0 0,0 false
V100135

Disengage the 2 rear clips first
V100136

Disengage the 2 front clips next


Lift the rear of the No. 2 cylinder head cover to disengage the 2 rear clips. Lift the front of the No. 2 cylinder head cover to disengage the 2 front clips and remove the No. 2 cylinder head cover.

NOTICE:

Attempting to disengage both front and rear clips at the same time may cause the No. 2 cylinder head cover to break.



Hide 11101J 2.REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side)

a.
A391994

Disconnect the camshaft timing oil control valve assembly connector.


b.

Remove the bolt and camshaft timing oil control valve assembly from the cylinder head cover sub-assembly.

NOTICE:
·

Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with the cylinder head cover sub-assembly).

·

If the camshaft timing oil control valve assembly has been struck or dropped, replace it.




c.
A195062C36
1.021,0.448 1.313,0.448 1.313,0.448 1.594,0.875 false 0.844,0.385 1.156,0.542 0.313,0.156 10 *1
*1 O-ring


Remove the O-ring from the camshaft timing oil control valve assembly.


Hide 11101J 3.REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side)

a.
A391995C01
1.875,1.219 2.219,1.396 true 1.552,1.625 2.031,2.021 true 2.24,1.313 2.469,1.51 0.229,0.198 10 true *1 2.042,1.948 2.271,2.146 0.229,0.198 10 true *2
*1 Camshaft Timing Oil Control Valve Assembly
*2 Wire Harness Bracket


Disconnect the camshaft timing oil control valve assembly connector.


b.

Remove the bolt and wire harness bracket.


c.

Remove the camshaft timing oil control valve assembly from the cylinder head cover sub-assembly.

NOTICE:
·

Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with the cylinder head cover sub-assembly).

·

If the camshaft timing oil control valve assembly has been struck or dropped, replace it.




d.
A391996C01
1.104,0.427 1.354,0.427 1.354,0.427 1.604,1 false 0.896,0.333 1.208,0.531 0.313,0.198 10 false *1
*1 O-ring


Remove the O-ring from the camshaft timing oil control valve assembly.