Home › Engine / Hybrid System › 3ZR-FAE (ENGINE CONTROL) › CAMSHAFT OIL CONTROL VALVE
RM32H0E _51 Engine / Hybrid System _059607 3ZR-FAE ENGINE CONTROL _0293869 CAMSHAFT OIL CONTROL VALVE G

3ZR-FAE ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  INSPECTION  


PROCEDURE

Hide 11101J 1.INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

a.
A246904C12
0.083,0.094 0.396,0.292 0.313,0.198 10 false *a
*a Component without harness connected
(Camshaft Timing Oil Control Valve Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 6.9 to 7.9 Ω


If the result is not as specified, replace the camshaft timing oil control valve assembly.


b.

Check the operation.

i.
A320480C03
2.146,0.938 2.479,0.448 2.479,0.448 2.594,0.448 true 0.146,0.104 0.458,0.26 0.313,0.156 10 false *a 1.74,0.344 2.052,0.5 0.313,0.156 10 false *b 1.76,1.646 2.073,1.802 0.313,0.156 10 false *c 2.667,0.375 2.979,0.531 0.313,0.156 10 false *d
*a Component without harness connected
(Camshaft Timing Oil Control Valve Assembly)
*b When Applied
*c When Cut Off
*d Spool Valve


Connect a battery positive (+) lead to terminal 1 and negative (-) lead to terminal 2, and check the movement of the spool valve.

OK:
Condition Specified Condition
Battery voltage is applied Valve moves in left arrow direction shown in illustration
Battery voltage is cut off Valve moves in right arrow direction shown in illustration


NOTICE:

Accumulation of foreign matter can cause minor pressure leaks. Minor pressure leaks in the intake side camshaft timing oil control valve assembly will cause the intake camshaft to advance. Minor pressure leaks in the exhaust side camshaft timing oil control valve assembly will cause the exhaust camshaft to retard. The inappropriate camshaft timing that results from these leaks will cause a DTC to be stored.


If the result is not as specified, replace the camshaft timing oil control valve assembly.