Home › Engine / Hybrid System › 3ZR-FAE (ENGINE CONTROL) › MASS AIR FLOW METER
RM32H0E _51 Engine / Hybrid System _059607 3ZR-FAE ENGINE CONTROL _0293874 MASS AIR FLOW METER A

3ZR-FAE ENGINE CONTROL  MASS AIR FLOW METER  INSTALLATION  


PROCEDURE

Hide 22204 1.INSTALL MASS AIR FLOW METER

HINT:

Perform "Inspection After Repair" after replacing the mass air flow meter.

Click hereEngine / Hybrid System>3ZR-FAE (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION


a.

Install the mass air flow meter to the air cleaner cap sub-assembly with the 2 screws.

NOTICE:
·

If the mass air flow meter has been struck or dropped, replace it.

·

If reusing the mass air flow meter, be sure to inspect the O-ring.

·

Make sure that the O-ring is not cracked or moved out of place when installing the mass air flow meter.




b.

Connect the mass air flow meter connector.


Hide 2.PERFORM INITIALIZATION

a.

Perform "Inspection After Repair" after replacing the mass air flow meter.

Click hereEngine / Hybrid System>3ZR-FAE (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION