Home › Engine / Hybrid System › 3ZR-FAE (ENGINE CONTROL) › AIR FUEL RATIO SENSOR
RM32H0E _51 Engine / Hybrid System _059607 3ZR-FAE ENGINE CONTROL _0293882 AIR FUEL RATIO SENSOR G

3ZR-FAE ENGINE CONTROL  AIR FUEL RATIO SENSOR  INSPECTION  


PROCEDURE

Hide 89467B 1.INSPECT AIR FUEL RATIO SENSOR

a.
A079112C07
1.094,0.615 1.396,0.854 true 1.094,1.646 1.396,1.406 true 2.313,0.615 2,0.854 true 2.354,0.51 3.063,0.823 0.708,0.313 10 false HA1A 0.865,0.51 1.427,0.75 0.563,0.24 10 false +B 0.74,1.604 1.438,1.896 0.698,0.292 10 false A1A- 0.146,0.146 0.688,0.469 0.542,0.323 10 false *a
*a Component without harness connected
(Air Fuel Ratio Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (HA1A) - 2 (+B) 20°C (68°F) 1.6 to 3.2 Ω
1 (HA1A) - 4 (A1A-) Always 10 kΩ or higher


If the result is not as specified, replace the air fuel ratio sensor.