Home › Engine / Hybrid System › 8NR-FTS (FUEL) › FUEL SENDER GAUGE ASSEMBLY (for 2WD)
RM32H0E _51 Engine / Hybrid System _059909 8NR-FTS FUEL _0293904 FUEL SENDER GAUGE ASSEMBLY(for 2WD) A

8NR-FTS FUEL  FUEL SENDER GAUGE ASSEMBLY(for 2WD)  INSTALLATION  


PROCEDURE

Hide 83320 1.INSTALL FUEL SENDER GAUGE ASSEMBLY

a.

Engage the claw to install the fuel sender gauge assembly to the fuel suction tube with pump and gauge assembly.

NOTICE:

Be careful not to bend the arm of the fuel sender gauge assembly.



b.

Connect the fuel sender gauge assembly connector.


c.

Install the harness protector to the wire harness.

NOTICE:

Do not damage the wire harness.



d.

Engage the 2 clamps to connect the wire harness.

NOTICE:

Do not damage the wire harness.



Hide 77020A 2.INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY