Home › Vehicle Interior › LIGHTING (INT) › VANITY LIGHT
RM32H0E _58 Vehicle Interior _060018 LIGHTING (INT) _0294058 VANITY LIGHT A

LIGHTING (INT)  VANITY LIGHT  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for both the LH and RH sides.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 81340 1.REMOVE VANITY LIGHT ASSEMBLY

a.
E357250C01
0.698,1.021 0.344,0.76 true 0.156,0.646 0.344,0.823 0.188,0.177 10 true *a
*a Protective Tape
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


Using a screwdriver with its tip wrapped in protective tape, disengage the claw and guide to remove the vanity light assembly from the roof headlining as shown in the illustration.


b.
E357251

Disengage the claws to remove the vanity light assembly from the bulb holder.


Hide 81340B 2.REMOVE VANITY LIGHT BULB