Home › Vehicle Interior › LIGHTING (INT) › REAR DOOR COURTESY SWITCH
RM32H0E _58 Vehicle Interior _060018 LIGHTING (INT) _0294069 REAR DOOR COURTESY SWITCH A

LIGHTING (INT)  REAR DOOR COURTESY SWITCH  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure as for the LH and RH sides.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 84234 1.INSTALL REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY

a.
E357286C01
0,0 0,0 false
V113147

Install in this Direction


Using a T30 "TORX" socket wrench, install the rear door courtesy light switch assembly with the screw.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


b.

Connect the connector.


Hide 62552F 2.INSTALL REAR SEAT SIDE GARNISH

Hide 71304C 3.INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY

Hide 62332A 4.CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP

a.
B461392

Connect the rear door opening trim weatherstrip to the area shown in the illustration.


Hide 67918A 5.INSTALL REAR DOOR SCUFF PLATE

Hide 6.INSTALL REAR SEAT ASSEMBLY