Home › Engine / Hybrid System › 8NR-FTS (LUBRICATION) › OIL LEVEL SENSOR
RM32H0E _51 Engine / Hybrid System _060037 8NR-FTS LUBRICATION _0294099 OIL LEVEL SENSOR G

8NR-FTS LUBRICATION  OIL LEVEL SENSOR  INSPECTION  


PROCEDURE

Hide 89491 1.INSPECT ENGINE OIL LEVEL SENSOR

a.
A329046C03
2.354,0.479 2.104,0.479 2.104,0.479 1.698,1.104 true 1.906,2.167 2.042,2.167 2.042,2.167 2.167,2.552 true 1.375,3.01 1.563,3.292 1.563,3.292 1.688,3.292 true 0.083,0.063 0.385,0.271 0.302,0.208 10 false *a 2.438,0.385 2.698,0.604 0.26,0.219 10 false 1 0.896,2.083 1.219,2.281 0.323,0.198 10 false *c 2.448,2.083 2.802,2.302 0.354,0.219 10 false *d 1.698,2.063 2,2.26 0.302,0.198 10 false *b 1.781,3.198 2,3.375 0.219,0.177 10 false *b
*a Component without harness connected
(Engine Oil Level Sensor)
*b Engine Oil Level Sensor Body
*c ON
*d OFF


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - Engine oil level sensor body ON Below 1 Ω
OFF 10 kΩ or higher


If the result is not as specified, replace the engine oil level sensor.