Home › Engine / Hybrid System › 8NR-FTS (EMISSION CONTROL) › PURGE VALVE
RM32H0E _51 Engine / Hybrid System _060038 8NR-FTS EMISSION CONTROL _0294112 PURGE VALVE A

8NR-FTS EMISSION CONTROL  PURGE VALVE  REMOVAL  


PROCEDURE

Hide 25860 1.REMOVE PURGE VALVE (PURGE VSV)

a.
A353300C02
2.094,1.125 2.25,1.594 2.25,1.594 2.438,1.594 true 1.365,1.115 1.115,1.625 1.115,1.625 0.948,1.615 true 1.615,0.958 1.333,0.208 1.333,0.208 1.167,0.198 true 0.927,0.125 1.167,0.302 0.24,0.177 10 true *1 2.469,1.531 2.708,1.74 0.24,0.208 10 true *2 0.719,1.542 0.979,1.74 0.26,0.198 10 true *3
*1 No. 1 Check Valve
*2 No. 2 Fuel Vapor Feed Hose
*3 No. 3 Fuel Vapor Feed Hose


Slide the clip and disconnect the No. 3 fuel vapor feed hose from the No. 1 check valve.


b.

Disconnect the No. 2 fuel vapor feed hose from the No. 1 check valve.


c.

Disengage the clamp and remove the No. 1 check valve from the intake manifold.


d.
A393605C01
1.417,0.667 1.583,0.333 1.583,0.333 1.75,0.333 true 1.333,1.417 1.167,1.75 1.167,1.75 1,1.75 true 1.75,1.354 1.917,1.75 1.917,1.75 2.083,1.75 true 2.104,1.667 2.313,1.844 0.208,0.177 10 true *1 0.792,1.677 1,1.865 0.208,0.188 10 true *2 1.76,0.24 1.969,0.417 0.208,0.177 10 true *3
*1 Purge Valve (Purge VSV)
*2 No. 2 Fuel Vapor Feed Hose
*3 No. 1 Fuel Vapor Feed Hose


Disconnect the purge valve (purge VSV) connector.


e.

Disengage the wire harness clamp from the purge valve (purge VSV).


f.

Remove the No. 2 fuel vapor feed hose from the purge valve (purge VSV).


g.

Disconnect the No. 1 fuel vapor feed hose from the purge valve (purge VSV).


h.

Remove the bolt and purge valve (purge VSV) from the intake manifold.