Home › Audio / Visual / Telematics › TELEMATICS › TELEMATICS TRANSCEIVER
RM32H0E _56 Audio / Visual / Telematics _060052 TELEMATICS _0294133 TELEMATICS TRANSCEIVER A

TELEMATICS  TELEMATICS TRANSCEIVER  REMOVAL  


CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the telematics transceiver removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced
Replacement Part or Procedure Necessary Procedure Effect/Inoperative when not Performed Link
Telematics transceiver Register vehicle information Emergency call service (Click here)

PROCEDURE

Hide 1.REMOVE REAR CONSOLE BOX ASSEMBLY

Hide 86741A 2.REMOVE TELEMATICS TRANSCEIVER

a.
E357296

Disconnect the 3 connectors.


b.

Disengage the clamps.


c.

Remove the 2 nuts and telematics transceiver.