Home › Vehicle Interior › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY(for LH Side)
RM32H0E _58 Vehicle Interior _060065 SEAT BELT _0294236 REAR SEAT INNER BELT ASSEMBLY(for LH Side) G

SEAT BELT  REAR SEAT INNER BELT ASSEMBLY(for LH Side)  INSPECTION  


PROCEDURE

Hide 73480 1.INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH (w/ Seat Belt Warning System)

a.

for LH:

i.
B276694C47
1.5,0.25 1.917,0.5 0.417,0.25 1.135,1.813 1.375,1.208 true 2,1.813 1.542,1.208 true 0.188,0.135 0.344,0.271 0.156,0.135 10 false *a 1.573,0.302 2.031,0.5 0.458,0.198 10 false M32 0.969,1.875 1.344,2.104 0.375,0.229 10 false LBR- 1.885,1.865 2.26,2.094 0.375,0.229 10 false LBR+
*a Component without harness connected
(Rear Seat Inner with Center Belt Assembly LH)


Check the resistance.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
M32-4 (LBR+) - M32-5 (LBR-) Rear seat belt LH unfastened Below 1 Ω
Rear seat belt LH fastened 10 kΩ or higher


If the result is not as specified, replace the rear seat inner with center belt assembly LH.



b.

for CENTER:

i.
B460289C01
1.417,0.25 1.917,0.5 0.5,0.25 2.438,1.792 2.104,1.229 true 1.479,1.833 1.792,1.229 true 0.26,0.25 0.573,0.448 0.313,0.198 10 false *a 1.552,0.292 1.865,0.49 0.313,0.198 10 false M33 2.281,1.844 2.729,2.052 0.448,0.208 10 false CBR+ 1.313,1.865 1.76,2.073 0.448,0.208 10 false CBR-
*a Component without harness connected
(Rear Seat Inner with Center Belt Assembly LH)


Check the resistance.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
M33-1 (CBR+) - M33-2 (CBR-) Rear seat center belt unfastened Below 1 Ω
Rear seat center belt fastened 10 kΩ or higher


If the result is not as specified, replace the rear seat inner with center belt assembly LH.