Home › Vehicle Interior › SEAT BELT › REAR CENTER SEAT OUTER BELT ASSEMBLY
RM32H0E _58 Vehicle Interior _060065 SEAT BELT _0294239 REAR CENTER SEAT OUTER BELT ASSEMBLY G

SEAT BELT  REAR CENTER SEAT OUTER BELT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 73350C 1.INSPECT REAR CENTER SEAT OUTER BELT ASSEMBLY

a.
B459839C01
0.469,3 0.792,2.698 true 0.344,2.958 0.656,3.115 0.313,0.156 10 false *a 1.188,0.094 1.5,0.25 0.313,0.156 10 false *b 2.396,0.323 2.708,0.479 0.313,0.156 10 false *c 1.74,0.365 2.052,0.521 0.313,0.156 10 false *d 0.74,0.354 1.052,0.51 0.313,0.156 10 false *e 2.708,0.688 3.021,0.844 0.313,0.156 10 false *e
*a Retractor
*b 0°
*c 20°
*d Unlock
*e Lock


Before installing the rear center seat outer belt assembly, check the ELR function.

NOTICE:

Do not disassemble the retractor.


i.

When the inclination of the retractor is between 0° and 20°, check that the belt can be pulled from the retractor. When the inclination of the retractor is less 0° or more than 20°, check that the belt locks.

If the result is not as specified, replace the rear center seat outer belt assembly.