Use the same procedure for RHD and LHD vehicles.
The following procedure is for LHD vehicles.
73705B
1.INSTALL CROSS ANCHOR BRACKET SUB-ASSEMBLY (for LH Side)
Temporarily install the cross anchor bracket sub-assembly with the 2 bolts.
Tighten the 2 bolts in the order shown in the illustration.
Engage the clamps.
73705B
2.INSTALL CROSS ANCHOR BRACKET SUB-ASSEMBLY (for RH Side)
Temporarily install the cross anchor bracket sub-assembly with the 2 bolts.
Tighten the 2 bolts in the order shown in the illustration.
Engage the clamps.
72693
3.INSTALL REAR SEAT CUSHION LOCK HOOK
4.INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY
73350C
5.CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY