Home › Vehicle Interior › DOOR LOCK › WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Entry and Start System)
RM32H0E _58 Vehicle Interior _059647 DOOR LOCK _0294251 WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Entry and Start System) D

DOOR LOCK  WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Entry and Start System)  DIAGNOSIS SYSTEM  



INSPECT BATTERY VOLTAGE


a.

Measure the vehicle battery voltage.

Standard Voltage:

11 to 14 V


If the voltage is below 11 V, recharge or replace the battery.



SELF-DIAGNOSTIC MODE (USING GTS)


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Main Body / Wireless Door Lock Diagnosis Mode.

Body Electrical > Main Body > Utility
Tester Display
Wireless Door Lock Diagnosis Mode
50005 123 2164

e.

Proceed to the next step in accordance with the prompts on the GTS screen.


f.
B220865E21
0.125,0.031 1.802,0.323 1.677,0.292 10 Interior Light Output: 0.635,1.406 1.063,1.688 0.427,0.281 10 ON 0.573,1.698 1.042,2.01 0.469,0.313 10 OFF 1.552,2.167 1.917,2.5 0.365,0.333 10 T1 2.146,2.167 2.604,2.604 0.458,0.438 10 T2 1.979,2.604 3.427,3.042 1.448,0.438 10 T1: 0.25 seconds 1.979,2.917 3.292,3.313 1.313,0.396 10 T2: 0.5 seconds 1.802,2.167 2.125,2.51 0.323,0.344 10 T1

Check that the system has switched to self-diagnostic mode by checking the interior light output pattern.


g.

Check the diagnostic outputs when a door control transmitter assembly switch is pressed. The diagnostic outputs can be checked by the interior light patterns.

B462101E01
0.083,0.083 3.448,0.281 3.365,0.198 10 false Interior Light Output: 0.344,1.333 3.708,1.531 3.365,0.198 10 false (Lock/Unlock Switch): 0.344,1.01 3.708,1.208 3.365,0.198 10 false Normal Wave (A) 0.521,1.948 1.188,2.146 0.667,0.198 10 false ON 0.448,2.344 1.115,2.542 0.667,0.198 10 false OFF 1.24,2.792 1.906,2.99 0.667,0.198 10 false T1 1.75,2.792 2.417,2.99 0.667,0.198 10 false T2 4.198,1.531 4.865,1.729 0.667,0.198 10 false OFF 4.271,1.146 4.938,1.344 0.667,0.198 10 false ON 4.125,0.417 6.333,0.667 2.208,0.25 10 false Unmatching Recognition Code (B): 4.125,2.75 5.917,3 1.792,0.25 10 false No Diagnostic Output (C): 4.958,1.979 6.583,2.229 1.625,0.25 10 false Wave is being received 4.198,3.354 4.865,3.552 0.667,0.198 10 false OFF 0.448,3.5 3.813,3.698 3.365,0.198 10 false T1: 0.25 seconds (Interior Light) 0.448,3.833 3.813,4.031 3.365,0.198 10 false T2: 0.5 seconds (Interior Light)

Result
Interior Light Output Suspected Area
A Normal (No malfunction)
B Register wireless code
C Wave interference or malfunction of a related component