Home › Engine / Hybrid System › 3ZR-FAE (ENGINE MECHANICAL) › CYLINDER HEAD
RM32H0E _51 Engine / Hybrid System _059726 3ZR-FAE ENGINE MECHANICAL _0294290 CYLINDER HEAD A

3ZR-FAE ENGINE MECHANICAL  CYLINDER HEAD  DISASSEMBLY  


PROCEDURE

Hide 13711 1.REMOVE INTAKE VALVE

a.
A331963N01
1.625,0.229 1.75,0.229 1.75,0.229 1.948,0.552 false 1.354,0.188 1.813,0.385 0.458,0.198 10 false SST

Using SST, compress the inner compression spring and remove the valve spring retainer locks.

SST
09202-70020  09202-00020  

HINT:

Arrange the removed parts in the correct order.



b.

Remove the valve spring retainer, inner compression spring and intake valve.

HINT:

Arrange the removed parts in the correct order.



Hide 13715 2.REMOVE EXHAUST VALVE

a.
A331964N01
0.469,1.823 0.469,1.646 false 0.365,1.875 0.823,2.073 0.458,0.198 10 false SST

Using SST, compress the inner compression spring and remove the valve spring retainer locks.

SST
09202-70020  09202-00020  

HINT:

Arrange the removed parts in the correct order.



b.

Remove the valve spring retainer, inner compression spring and exhaust valve.

HINT:

Arrange the removed parts in the correct order.



Hide 3.REMOVE VALVE STEM OIL SEAL

a.
A150948

Using needle-nose pliers, remove the valve stem oil seals.


Hide 13734 4.REMOVE VALVE SPRING SEAT

a.
A150949

Using compressed air and a magnet hand, remove the valve spring seats by blowing air onto them.


Hide 11117B 5.REMOVE NO. 2 STRAIGHT SCREW PLUG

NOTICE:

If coolant leaks from a No. 2 straight screw plug or the plug is corroded, replace it.


a.
A150950

Using a 10 mm hexagon wrench, remove the 3 No. 2 screw plugs and 3 gaskets.


Hide 6.REMOVE STUD BOLT

NOTICE:

If a stud bolt is deformed or its threads are damaged, replace it.


a.

Using E7 and E8 "TORX" socket wrenches, remove the stud bolts.

A289031C03
0.094,0.083 0.51,0.385 0.417,0.302 10 false *a 3.573,0.083 3.99,0.396 0.417,0.313 10 false *b
*a Intake Manifold Side *b Exhaust Manifold Side