Home › Engine / Hybrid System › 8NR-FTS (ENGINE MECHANICAL) › CYLINDER HEAD › 2016.10–2019.09
RM32H0E _51 Engine / Hybrid System _059498 8NR-FTS ENGINE MECHANICAL _0294293 CYLINDER HEAD A

8NR-FTS ENGINE MECHANICAL  CYLINDER HEAD  DISASSEMBLY  


PROCEDURE

Hide 13711 1.REMOVE INTAKE VALVE

a.
A352681C01
1.813,1.219 1.51,0.365 1.51,0.365 1.802,0.771 true 2.604,1.969 3.063,1.958 3.063,1.958 3.094,1.615 true 1.365,0.198 1.823,0.396 0.458,0.198 10 false SST 3.073,1.979 3.385,2.177 0.313,0.198 10 false *a
*a Wooden Block


Using SST and wooden blocks, compress the inner compression spring and remove the 8 valve spring retainer locks.

SST
09202-70020  
09202-00020  

HINT:

Arrange the removed parts in such a way that they can be reinstalled to their original locations.



b.

Remove the 8 valve spring retainers, 8 inner compression springs and 8 intake valves from the cylinder head sub-assembly.

HINT:

Arrange the removed parts in such a way that they can be reinstalled to their original locations.



Hide 13715 2.REMOVE EXHAUST VALVE

a.
A352682C01
1.01,1.063 1.125,0.625 1.125,0.625 0.979,0.615 true 1.979,1.958 2.646,1.917 2.646,1.917 2.469,1.625 true 1.177,0.521 1.635,0.719 0.458,0.198 10 false SST 2.708,1.906 3.021,2.104 0.313,0.198 10 false *a
*a Wooden Block


Using SST and wooden blocks, compress the inner compression spring and remove the 8 valve spring retainer locks.

SST
09202-70020  
09202-00020  

HINT:

Arrange the removed parts in such a way that they can be reinstalled to their original locations.



b.

Remove the 8 valve spring retainers, 8 inner compression springs and 8 exhaust valves from the cylinder head sub-assembly.

HINT:

Arrange the removed parts in such a way that they can be reinstalled to their original locations.



Hide 13711E 3.REMOVE INTAKE VALVE STEM OIL SEAL

a.
A352683

Using needle-nose pliers, remove the 8 intake valve stem oil seals.


Hide 13715A 4.REMOVE EXHAUST VALVE STEM OIL SEAL

HINT:

Use the same procedure as for the intake side.


Hide 13734 5.REMOVE VALVE SPRING SEAT

a.
A352684

Using compressed air and a magnet hand, remove the 16 valve spring seats by blowing air onto them.


Hide 11117E 6.REMOVE NO. 1 STRAIGHT SCREW PLUG

NOTICE:

If coolant leaks from a No. 1 straight screw plug or a plug is corroded, replace it.


a.
A352685

Using a 6 mm hexagon wrench, remove the 2 No. 1 straight screw plugs from the cylinder head sub-assembly.


Hide 11117F 7.REMOVE NO. 2 STRAIGHT SCREW PLUG

NOTICE:

If coolant leaks from a No. 2 straight screw plug or a plug is corroded, replace it.


a.
A352686

Using a 10 mm hexagon wrench, remove the No. 2 straight screw plug and cylinder head screw plug gasket from the cylinder head sub-assembly.


Hide 11117G 8.REMOVE NO. 3 STRAIGHT SCREW PLUG

NOTICE:

If coolant leaks from a No. 3 straight screw plug or the plug is corroded, replace it.


a.
A355611

Using a 14 mm hexagon wrench, remove the 2 No. 3 straight screw plugs and 2 No. 2 cylinder head screw plug gaskets from the cylinder head sub-assembly.