Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM
RM32H0E _58 Vehicle Interior _060136 METER / GAUGE / DISPLAY _0294876 METER / GAUGE SYSTEM W

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE METER / GAUGE SYSTEM


a.

Customizing with the GTS.

i.

Connect the GTS to the DLC3.


ii.

Turn the ignition switch ON.


iii.

Turn the GTS on.


iv.

Enter the following menus: Customize Setting / Warning or Display.


v.

Select the setting by referring to the table below.

NOTICE:

Be sure to record the current value before customizing.


Warning
Tester Display Description Default Setting ECU
Flasher Sound Tone Setting Function to change the flasher sound tone Tone 1 00:Tone 1,01:Tone 2,10:Tone 3 Combination meter assembly
50006 7
Display
Tester Display Description Default Setting ECU
ECO Drive Indicator Zone Function to change the ECO Drive Indicator Zone ON 0:OFF,1:ON Combination meter assembly
ECO Drive Indicator Light Function to change the ECO Drive Indicator light*1 ON 0:OFF,1:ON Combination meter assembly
ODO Display Time After IG OFF Setting Function to change the ODO display time after the ignition switch is turned off 30s 00:30s,01:60s,10:600s,11:OFF Combination meter assembly
50006 14
Warning
Tester Display Description Default Setting ECU
Flasher Sound Tone Setting Function to change the flasher sound tone Tone 1 00:Tone 1,01:Tone 2,10:Tone 3 Combination meter assembly
Lane Change Flashing Times Setting Function to change the lane change flashing time 3 000:OFF,001:3,010:4,011:5,100:6,101:7 Combination meter assembly
50006 7

*1: for Color TFT Type