The following DTCs are stored when a malfunction occurs in the skid control ECU (brake actuator assembly).
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Memory | Note |
|---|---|---|---|---|---|
| C13A5 | Electric Current of Motor | An electric parking brake motor failure. | Skid control ECU (brake actuator assembly) | DTC stored | An electric parking brake system malfunction is displayed on the multi-information display. |
| C13B0 | Electric Parking Brake ECU Malfunction | An electric parking brake ECU malfunction. | Skid control ECU (brake actuator assembly) | DTC stored | An electric parking brake system malfunction is displayed on the multi-information display. |
When replacing the skid control ECU (brake actuator assembly), operate the electric parking brake switch (electric parking brake switch assembly) as the parking brake indicator light (red) blinks when the ignition switch is first turned to ON.
Replace the skid control ECU (brake actuator assembly).
Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>BRAKE ACTUATOR (for LHD)>REMOVAL
| Proceed to |
|---|
| NEXT |
NEXT