Home › Brake › PARKING BRAKE › ELECTRIC PARKING BRAKE SYSTEM
RM32H0E _54 Brake _060043 PARKING BRAKE _0294919 ELECTRIC PARKING BRAKE SYSTEM C

PARKING BRAKE  ELECTRIC PARKING BRAKE SYSTEM  C13AA  EPB High Temperature  


DESCRIPTION

If the electric parking brake is used continuously, system operation is stopped to prevent the parking brake actuator assembly from overheating.

This DTC is stored when system operation is stopped to prevent the parking brake actuator assembly from overheating and is not a malfunction.

DTC No. Detection Item DTC Detection Condition Trouble Area Memory Note
C13AA EPB High Temperature Protects the electric parking brake from overheating by frequently requested lock/release commands. Overheat due to continuous use of system DTC stored A warning is displayed on the multi-information display indicating electric parking brake system operation is stopped due to high temperatures.

PROCEDURE

1.ELECTRIC PARKING BRAKE OVERHEAT
a.

With the overheat warning displayed on the multi-information display, wait for approximately 1 minute.


b.

Check that the overheat warning has disappeared.

HINT:
·

Check the display after turning the ignition switch off and to ON.

·

After the warning has disappeared and the electric parking brake system returns to normal, clear the DTCs.



Chassis > ABS/VSC/TRC/EPB > Clear DTCs
50002 105

Result:
Proceed to
NEXT



NEXT

END