Home › Engine / Hybrid System › 3ZR-FAE (FUEL) › FUEL PRESSURE REGULATOR
RM32H0E _51 Engine / Hybrid System _060184 3ZR-FAE FUEL _0295034 FUEL PRESSURE REGULATOR A

3ZR-FAE FUEL  FUEL PRESSURE REGULATOR  INSTALLATION  


PROCEDURE

Hide 23280J 1.INSTALL FUEL PRESSURE REGULATOR ASSEMBLY

a.

Apply gasoline to 2 new O-rings and then install them to the fuel pressure regulator assembly.


b.

Install the fuel pressure regulator assembly to the fuel suction tube with pump and gauge assembly.

NOTICE:

Make sure that the O-rings are not cut or pinched during installation.



c.

Install the No. 3 fuel suction support to the fuel suction tube with pump and gauge assembly.


Hide 77020A 2.INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY