Home › Engine / Hybrid System › 8NR-FTS (ENGINE CONTROL) › ACCELERATOR PEDAL
RM32H0E _51 Engine / Hybrid System _059353 8NR-FTS ENGINE CONTROL _0295067 ACCELERATOR PEDAL A

8NR-FTS ENGINE CONTROL  ACCELERATOR PEDAL  REMOVAL  


PROCEDURE

Hide 78110K 1.REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

NOTICE:
·

Avoid physical shock to the accelerator pedal sensor assembly.

·

Do not disassemble the accelerator pedal sensor assembly.

·

The accelerator pedal sensor assembly does not require lubrication.

·

Do not apply oil or other lubricants to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.



a.
A394699C01
0.104,2.792 0.333,3 0.229,0.208 10 true *B 0.083,0.115 0.313,0.323 0.229,0.208 10 true *A
*A for LHD
*B for RHD


Disconnect the accelerator pedal sensor assembly connector.


b.

Remove the 3 nuts and accelerator pedal sensor assembly.

NOTICE:

If the accelerator pedal sensor assembly has been struck or dropped, replace it.