Home › Engine / Hybrid System › 8NR-FTS (ENGINE CONTROL) › KNOCK SENSOR
RM32H0E _51 Engine / Hybrid System _059353 8NR-FTS ENGINE CONTROL _0295074 KNOCK SENSOR G

8NR-FTS ENGINE CONTROL  KNOCK SENSOR  INSPECTION  


PROCEDURE

Hide 89615 1.INSPECT KNOCK SENSOR

a.
A294030C04
1.208,0.073 1.521,0.229 0.313,0.156 10 false *a
*a Component without harness connected
(Knock Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 25°C (77°F) 120 to 280 kΩ


If the result is not as specified, replace the knock sensor.