Home › Engine / Hybrid System › 8NR-FTS (ENGINE CONTROL) › MANIFOLD ABSOLUTE PRESSURE SENSOR
RM32H0E _51 Engine / Hybrid System _059353 8NR-FTS ENGINE CONTROL _0295075 MANIFOLD ABSOLUTE PRESSURE SENSOR A

8NR-FTS ENGINE CONTROL  MANIFOLD ABSOLUTE PRESSURE SENSOR  REMOVAL  


PROCEDURE

Hide 89421K 1.REMOVE NO. 1 TURBO PRESSURE SENSOR

a.
A392727

Disconnect the No. 1 turbo pressure sensor connector.


b.

Remove the bolt and No. 1 turbo pressure sensor from the intercooler assembly.

NOTICE:

If the No. 1 turbo pressure sensor has been struck or dropped, replace it.



Hide 89421L 2.REMOVE NO. 2 TURBO PRESSURE SENSOR

a.
A392728

Disconnect the No. 2 turbo pressure sensor connector.


b.

Remove the bolt and No. 2 turbo pressure sensor from the intake manifold.

NOTICE:

If the No. 2 turbo pressure sensor has been struck or dropped, replace it.