Home › Engine / Hybrid System › 8NR-FTS (ENGINE CONTROL) › MANIFOLD ABSOLUTE PRESSURE SENSOR
RM32H0E _51 Engine / Hybrid System _059353 8NR-FTS ENGINE CONTROL _0295075 MANIFOLD ABSOLUTE PRESSURE SENSOR A

8NR-FTS ENGINE CONTROL  MANIFOLD ABSOLUTE PRESSURE SENSOR  INSTALLATION  


PROCEDURE

Hide 89421L 1.INSTALL NO. 2 TURBO PRESSURE SENSOR

a.

Install the No. 2 turbo pressure sensor to the intake manifold with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:

If the No. 2 turbo pressure sensor has been struck or dropped, replace it.



b.

Connect the No. 2 turbo pressure sensor connector.


Hide 89421K 2.INSTALL NO. 1 TURBO PRESSURE SENSOR

a.

Install the No. 1 turbo pressure sensor to the intercooler assembly with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:

If the No. 1 turbo pressure sensor has been struck or dropped, replace it.



b.

Connect the No. 1 turbo pressure sensor connector.