Home › Engine / Hybrid System › 8NR-FTS (COOLING) › COOLING FAN SYSTEM
RM32H0E _51 Engine / Hybrid System _060195 8NR-FTS COOLING _0295080 COOLING FAN SYSTEM G

8NR-FTS COOLING  COOLING FAN SYSTEM  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT COOLING FAN SYSTEM

a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Engine / Active Test / Control the Engine Cooling Fan Duty Ratio.

Powertrain > Engine > Active Test
Tester Display
Control the Engine Cooling Fan Duty Ratio
50004 372 11

e.

Check the operation of the cooling fan while operating it using the GTS.

If the cooling fan motor does not operate, check the cooling fan circuit.

Click hereEngine / Hybrid System>8NR-FTS (COOLING)>COOLING FAN SYSTEM>Cooling Fan Circuit