Home › Engine / Hybrid System › 8NR-FTS (COOLING) › COOLING FAN MOTOR
RM32H0E _51 Engine / Hybrid System _060195 8NR-FTS COOLING _0295085 COOLING FAN MOTOR A

8NR-FTS COOLING  COOLING FAN MOTOR  INSTALLATION  


PROCEDURE

Hide 16363G 1.INSTALL COOLING FAN MOTOR LH

a.

Install the cooling fan motor LH to the fan shroud with the 3 screws.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)


Hide 16363F 2.INSTALL COOLING FAN MOTOR RH

a.

Install the cooling fan motor RH to the fan shroud with the 3 screws.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)


Hide 16364A 3.CONNECT COOLING FAN WIRE

a.
A399674

Connect the cooling fan wire connector to the cooling fan motor RH and lock with the lever.


b.

Engage the 2 clamps to connect the cooling fan wire to the fan shroud.


Hide 16361K 4.INSTALL FAN LH

NOTICE:

Do not reverse the position of the fan LH and fan RH when installing them. Doing so may damage the parts.


a.

Install the fan LH with the 3 screws.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)


Hide 16361J 5.INSTALL FAN RH

NOTICE:

Do not reverse the position of the fan LH and fan RH when installing them. Doing so may damage the parts.


a.

Install the fan RH with the 3 screws.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)


Hide 16400 6.INSTALL RADIATOR ASSEMBLY