Home › Engine / Hybrid System › 3ZR-FAE (COOLING) › THERMOSTAT
RM32H0E _51 Engine / Hybrid System _060196 3ZR-FAE COOLING _0295093 THERMOSTAT A

3ZR-FAE COOLING  THERMOSTAT  INSTALLATION  


PROCEDURE

Hide 16331A 1.INSTALL THERMOSTAT

a.

Install a new gasket to the thermostat.


b.
A395342C01
2.146,0.708 1.604,0.802 true 1.646,0 1.833,0.167 0.188,0.167 10 true *b 1.417,0 1.604,0.167 0.188,0.167 10 true *b 2.229,0.625 2.417,0.792 0.188,0.167 10 true *a
*a Jiggle Valve
*b 10°


Install the thermostat to the water inlet housing.

HINT:

The jiggle valve may be set within 10° on either side of the prescribed position.



Hide 16321 2.INSTALL WATER INLET

a.

Install the water inlet with the 2 nuts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 3.ADD ENGINE COOLANT

Hide 51441 5.INSTALL NO. 1 ENGINE UNDER COVER