Home › Engine / Hybrid System › 3ZR-FAE (COOLING) › COOLING FAN MOTOR
RM32H0E _51 Engine / Hybrid System _060196 3ZR-FAE COOLING _0295094 COOLING FAN MOTOR G

3ZR-FAE COOLING  COOLING FAN MOTOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 16363 1.INSPECT COOLING FAN MOTOR

a.

Disconnect the cooling fan motor connector.


b.
A255570C11
1.99,1.271 2.604,1.271 false 0.813,1.26 1.427,1.26 false 0.083,0.063 0.479,0.344 0.396,0.281 10 false *a 2.656,1.167 3.115,1.365 0.458,0.198 10 false (-) 0.583,1.167 1.042,1.365 0.458,0.198 10 false (+)
*a Component without harness connected
(Cooling Fan Motor)


Check that the cooling fan motor operates smoothly when the battery is connected to the cooling fan motor connector.


c.

Measure the current while the cooling fan motor is operating.

Standard Current:
Condition Specified Condition
Battery voltage applied at 20°C (68°F) 7.4 to 10.9 A


If the result is not as specified, replace the cooling fan motor.


d.

Connect the cooling fan motor connector.