Home › General › SPECIFICATIONS › 8NR-FTS BATTERY / CHARGING
RM32H0E _V1 General _059376 SPECIFICATIONS _0295268 8NR-FTS BATTERY / CHARGING F

SPECIFICATIONS  8NR-FTS BATTERY / CHARGING  SERVICE DATA  


Battery Standard voltage 12.6 to 12.8 V at 20°C (68°F)

Generator brush holder assembly (for DENSO Made)
Brush length Standard exposed brush length 9.5 to 11.5 mm (0.374 to 0.453 in.)
Minimum exposed brush length 4.5 mm (0.177 in.)

Generator rotor assembly (for DENSO Made)
Tester Connection Condition Specified Condition
Slip ring - Slip ring Approx. 20°C (68°F) 1.8 to 2.2 Ω
Slip ring - Rotor Always 10 MΩ or higher

Slip ring diameter Standard diameter 14.2 to 14.8 mm (0.559 to 0.583 in.)
Minimum diameter 14.0 mm (0.551 in.)