Home › Drivetrain › DRIVE SHAFT / PROPELLER SHAFT › PROPELLER SHAFT ASSEMBLY
RM32H0E _52 Drivetrain _060137 DRIVE SHAFT / PROPELLER SHAFT _0295581 PROPELLER SHAFT ASSEMBLY A

DRIVE SHAFT / PROPELLER SHAFT  PROPELLER SHAFT ASSEMBLY  REMOVAL  


PROCEDURE

Hide 58153 2.REMOVE FRONT NO. 2 FLOOR HEAT INSULATOR

a.
C362212

Remove the 2 clips and front No. 2 floor heat insulator from the vehicle body.


Hide 37100 3.REMOVE PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY

a.
C363271

Remove the 2 bolts and 2 center No. 2 support bearing washers, and disconnect the propeller with center bearing shaft assembly.


b.
C362214C01
1.729,1.333 2.156,1.729 2.156,1.729 1.708,1.24 true 2.198,1.656 2.51,1.854 0.313,0.198 10 true *a
*a Matchmark


Place matchmarks on the differential carrier assembly and propeller with center bearing shaft assembly.


c.

Remove the 4 nuts and 4 washers, and disconnect the propeller with center bearing shaft assembly from the differential carrier assembly.


d.
C362213C01
1.813,1.49 2.24,1.938 2.24,1.938 1.833,1.406 true 2.313,1.833 2.625,2.031 0.313,0.198 10 true *a
*a Matchmark


Place matchmarks on the transfer assembly and propeller with center bearing shaft assembly.


e.

Remove the 4 nuts and 4 washers, and disconnect the propeller with center bearing shaft assembly from the transfer assembly.