Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR OPENER SWITCH
RM32H0E _59 Vehicle Exterior _060017 DOOR / HATCH _0295671 BACK DOOR OPENER SWITCH G

DOOR / HATCH  BACK DOOR OPENER SWITCH  INSPECTION  


PROCEDURE

Hide 84840G 1.INSPECT BACK DOOR OPENER SWITCH ASSEMBLY (w/ Entry and Start System)

a.
B369965C05
2.417,1.24 2.656,0.604 true 2.771,1.219 2.771,0.604 true 0.198,1.385 0.406,1.542 0.208,0.156 10 false *a 0.781,1.292 0.958,1.458 0.177,0.167 10 true *b 0.063,0.063 0.375,0.219 0.313,0.156 10 false *c 2.333,1.26 2.646,1.458 0.313,0.198 10 false UL 2.75,1.26 2.896,1.458 0.146,0.198 10 false E
*a Not Pushed (OFF)
*b Pushed (ON)
*c Component without harness connected
(Back Door Opener Switch Assembly)


Check the operation of the back door opener switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
3 (UL) - 2 (E) Back door opener switch pushed (ON) Below 1 Ω
3 (UL) - 2 (E) Back door opener switch not pushed (OFF) 10 kΩ or higher


If the result is not as specified, replace the back door opener switch assembly.



b.
B369966C04
3.042,1.219 2.854,0.615 true 2.771,1.208 2.771,0.594 true 0.521,1.604 0.833,1.76 0.313,0.156 10 false *a 1.135,1.479 1.313,1.656 0.177,0.177 10 true *b 0.042,0.063 0.354,0.219 0.313,0.156 10 false *c 2.75,1.26 2.906,1.458 0.156,0.198 10 false E 3.063,1.26 3.219,1.458 0.156,0.198 10 false L
*a Not Pushed (OFF)
*b Pushed (ON)
*c Component without harness connected
(Back Door Opener Switch Assembly)


Check the operation of the back door lock switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 (L) - 2 (E) Back door lock switch pushed (ON) Below 1 Ω
1 (L) - 2 (E) Back door lock switch not pushed (OFF) 10 kΩ or higher


If the result is not as specified, replace the back door opener switch assembly.



Hide 84840G 2.INSPECT BACK DOOR OPENER SWITCH ASSEMBLY (w/o Entry and Start System)

a.
B369967C03
2.427,1.26 2.677,0.594 true 2.771,1.25 2.771,0.604 true 0.125,1.333 0.438,1.49 0.313,0.156 10 false *a 0.698,1.24 0.906,1.396 0.208,0.156 10 true *b 0.063,0.042 0.375,0.198 0.313,0.156 10 false *c 2.365,1.271 2.677,1.469 0.313,0.198 10 false UL 2.75,1.281 3.063,1.479 0.313,0.198 10 false E
*a Not Pushed (OFF)
*b Pushed (ON)
*c Component without harness connected
(Back Door Opener Switch Assembly)


Check the operation of the back door opener switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
3 (UL) - 2 (E) Back door opener switch pushed (ON) Below 1 Ω
3 (UL) - 2 (E) Back door opener switch not pushed (OFF) 10 kΩ or higher


If the result is not as specified, replace the back door opener switch assembly.