Home › Drivetrain › EC69 (MANUAL TRANSMISSION / TRANSAXLE) › SHIFT AND SELECT LEVER SHAFT › 2016.10–2019.09
RM32H0E _52 Drivetrain _060311 EC69 MANUAL TRANSMISSION / TRANSAXLE _0295686 SHIFT AND SELECT LEVER SHAFT A

EC69 MANUAL TRANSMISSION / TRANSAXLE  SHIFT AND SELECT LEVER SHAFT  DISASSEMBLY  


PROCEDURE

Hide 33252A 1.REMOVE INNER NO. 2 SHIFT LEVER

a.
C193736

Using a 5 mm pin punch and a hammer, remove the slotted spring pin and inner No. 2 shift lever from the shift and select lever shaft.

HINT:

Check the orientation of the inner No. 2 shift lever.



Hide 33237D 2.REMOVE RELEASE HEAD STRAIGHT PIN

a.
C193737

Using a 5 mm pin punch and a hammer, remove the slotted spring pin from the select stopper block.


b.
C193738

Using a 5 mm pin punch and a hammer, remove the slotted spring pin from the front inner shift lever.


c.
C193740

Turn the release head clockwise.


d.
C193741

Slide the select stopper block upwards and remove the release head straight pin from the front inner shift lever.


Hide 33288 3.REMOVE SELECT STOPPER BLOCK

a.
C195248

Remove the front inner shift lever, release head torsion spring, release head and select stopper block from the shift and select lever shaft.

HINT:

Check the orientation of the front inner shift lever, release head torsion spring, release head and select stopper block.