Home › Drivetrain › EC69 (MANUAL TRANSMISSION / TRANSAXLE) › SHIFT AND SELECT LEVER SHAFT › 2016.10–2019.09
RM32H0E _52 Drivetrain _060311 EC69 MANUAL TRANSMISSION / TRANSAXLE _0295686 SHIFT AND SELECT LEVER SHAFT A

EC69 MANUAL TRANSMISSION / TRANSAXLE  SHIFT AND SELECT LEVER SHAFT  REASSEMBLY  


PROCEDURE

Hide 33288 1.INSTALL SELECT STOPPER BLOCK

a.

Coat the select stopper block with gear oil.


b.
C193743N04
1.573,0.427 1.938,0.792 0.365,0.365 10 A 1.583,1.479 1.948,1.844 0.365,0.365 10 A 1.594,1.698 1.906,1.906 0.313,0.208 10 A-A

Install the select stopper block as shown in the illustration.

NOTICE:

Confirm the installation direction.



c.
C193744C01
2.604,0.531 3.073,0.75 0.469,0.219 10 *a
*a Depth


Using a 5 mm pin punch and a hammer, install the slotted spring pin to the shift and select lever shaft.

Driven in Depth:

-0.2 to 0.8 mm (-0.00787 to 0.0315 in.)



Hide 33237D 2.INSTALL RELEASE HEAD STRAIGHT PIN

a.
C193745

Install the release head straight pin to the select stopper block.


b.

Coat the release head with gear oil.


c.
C193746N03
0.563,1.51 0.771,1.771 0.208,0.26 10 A 2.385,1.344 2.594,1.604 0.208,0.26 10 A 1.625,2.375 1.979,2.625 0.354,0.25 10 A-A

Install the release head as shown in the illustration.

NOTICE:

Confirm the installation direction.



d.
C203683C03
0.667,1 1.219,1.073 false 1.073,1.302 1.219,1.448 0.146,0.146 10 A 1.896,0.604 2.042,0.75 0.146,0.146 10 A 0.177,2.438 0.594,2.604 0.417,0.167 10 A-A: 2.115,3.656 2.427,3.906 0.313,0.25 10 *d 0.969,2.698 1.229,2.927 0.26,0.229 10 *c 0.427,2.802 0.792,3.167 0.365,0.365 10 *b 0.521,0.917 0.896,1.271 0.375,0.354 10 *a
*a Hook
*b Hook Side
*c 14.5 to 15.5 mm (0.571 to 0.610 in.)
*d 8.3 to 9.3 mm (0.327 to 0.366 in.)


Install the release head torsion spring as shown in the illustration.

NOTICE:

Confirm the installation direction.



e.

Coat the front inner shift lever with gear oil.


f.
C193748

Install the front inner shift lever as shown in the illustration.

NOTICE:

Confirm the installation direction.


HINT:

Insert the release head torsion spring to the installation hole of the front inner shift lever.



g.
C193749C03
1.635,3.042 0.688,3.042 0.688,3.042 1.042,3.417 false 2.219,3.958 2.448,3.5 2.448,3.5 2.656,3.5 false 0.5,2.958 1.042,3.24 0.542,0.281 10 *a 2.74,3.438 3.323,3.813 0.583,0.375 10 *b 1.781,1.938 2.188,2.323 0.406,0.385 10 A 1.615,2.344 1.99,2.583 0.375,0.24 10 A-A 1.063,0.729 1.469,1.115 0.406,0.385 10 A
*a Spring
*b Straight Pin


Turn the front inner shift lever counterclockwise to align it with the installation surface of the straight pin, and install it.

NOTICE:

Confirm that the front inner shift lever is installed as shown in the illustration.



h.
C193750C01
0.625,0.115 1.115,0.344 0.49,0.229 10 *a
*a Depth


Using a 5 mm pin punch and a hammer, install the slotted spring pin to the shift and select lever shaft.

Driven in Depth:

-0.2 to 0.8 mm (-0.00787 to 0.0315 in.)



Hide 33252A 3.INSTALL INNER NO. 2 SHIFT LEVER

a.

Coat the inner No. 2 shift lever with gear oil.


b.
C193751C01
2.813,1.417 3.24,1.688 0.427,0.271 10 *a
*a Depth


Using a 5 mm pin punch and a hammer, install the inner No. 2 shift lever and slotted spring pin to the shift and select lever shaft.

Driven in Depth:

0 to 0.6 mm (0 to 0.0236 in.)


NOTICE:

Confirm the installation direction.