Turn the light control switch to the tail or head position.
Check that the daytime screen setting on the display adjustment screen is set to on.
| Result | Proceed to |
|---|---|
| Daytime screen setting is set to on. | A |
| Daytime screen setting is set to off. | B |
A
B
Enter the "Vehicle Signal Check Mode" screen. Refer to Check Vehicle Signal in Operation Check.
Check that the display changes between ON and OFF according to the light control switch operation.
| Light Control Switch | Display |
|---|---|
| Tail or head | ON |
| Off | OFF |
The display is updated once per second. It is normal for the display to lag behind the actual switch operation.
| Proceed to |
|---|
| OK |
| NG |
OK
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>RADIO RECEIVER (for Radio and Display Type)>REMOVAL
NG