Home › Vehicle Exterior › LIGHTING (EXT) › FOG LIGHT ASSEMBLY › 2016.10–2021.09
RM32H0E _59 Vehicle Exterior _060313 LIGHTING (EXT) _0295715 FOG LIGHT ASSEMBLY G

LIGHTING (EXT)  FOG LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81220 1.INSPECT FOG LIGHT ASSEMBLY LH (for LED Type)

a.
E329990C05
0.979,1.802 1.396,1.385 true 2.479,1.771 2.01,1.396 true 0.344,0.26 0.656,0.458 0.313,0.198 10 false *a 0.938,1.833 1.281,2.083 0.344,0.25 10 false B 2.51,1.813 2.854,2.063 0.344,0.25 10 false E
*a Component without harness connected
(Fog Light Assembly LH)


Apply battery voltage to the fog light assembly LH and check that the light comes on.

OK:
Condition Specified Condition
Battery positive (+) → Terminal 2 (B)
Battery negative (-) → Terminal 1 (E)
Fog light comes on


If the result is not as specified, replace the fog light assembly LH.


Hide 81210A 2.INSPECT FOG LIGHT ASSEMBLY RH (for LED Type)

a.
E329990C06
0.979,1.802 1.396,1.385 true 2.479,1.771 2.01,1.396 true 0.344,0.26 0.656,0.458 0.313,0.198 10 false *a 0.938,1.833 1.281,2.083 0.344,0.25 10 false B 2.51,1.813 2.854,2.063 0.344,0.25 10 false E
*a Component without harness connected
(Fog Light Assembly RH)


Apply battery voltage to the fog light assembly RH and check that the light comes on.

OK:
Condition Specified Condition
Battery positive (+) → Terminal 2 (B)
Battery negative (-) → Terminal 1 (E)
Fog light comes on


If the result is not as specified, replace the fog light assembly RH.