Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY(for Bulb Type)
RM32H0E _59 Vehicle Exterior _060313 LIGHTING (EXT) _0295718 REAR COMBINATION LIGHT ASSEMBLY(for Bulb Type) A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY(for Bulb Type)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 81498 1.REMOVE REAR COMBINATION LIGHT COVER

a.
E352408C02
0,0 0,0 false
V113147

Remove in this Direction


Disengage the claws to remove the rear combination light cover as shown in the illustration.


Hide 81560 2.REMOVE REAR COMBINATION LIGHT ASSEMBLY

a.
E351147C02
0,0 0,0 false
V100155

Protective Tape


Apply protective tape around the rear combination light assembly as shown in the illustration.


b.

Remove the 2 screws.


c.
E351148C02
0,0 0,0 false
V113147

Remove in this Direction


Pull the rear combination light assembly toward the rear of the vehicle as shown in the illustration to disengage the clip, guide and pin to separate the rear combination light assembly.

NOTICE:

To prevent the rear combination light assembly from falling when disengaging the pins and guides, lightly hold the rear combination light assembly.



d.
E351146

Disconnect the connector to remove the rear combination light assembly.