Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY(for Bulb Type) › 2016.10–2019.09
RM32H0E _59 Vehicle Exterior _060313 LIGHTING (EXT) _0295718 REAR COMBINATION LIGHT ASSEMBLY(for Bulb Type) A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY(for Bulb Type)  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 81536A 1.REMOVE REAR COMBINATION LIGHT LED

a.
E351149C01
0,0 0,0 false
V113147

Remove in this Direction


Disconnect the connector.


b.

Remove the screw.


c.

Turn the rear combination light LED as shown in the illustration to remove it.


Hide 81550L 2.REMOVE REAR TURN SIGNAL LIGHT BULB

a.
E351150C01
0,0 0,0 false
V113147

Remove in this Direction


Turn the rear combination light socket and wire with the rear turn signal light bulb as shown in the illustration to disconnect them as a unit.


b.
E352411C02
0,0 0,0 false
V113147

Remove in this Direction


Remove the rear turn signal light bulb from the rear combination light socket and wire.


Hide 81555H 3.REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE

a.
E351151

Disengage the clamp.


b.

Disconnect the connector to remove the rear combination light socket and wire.