Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY(for Bulb Type) › 2016.10–2019.09
RM32H0E _59 Vehicle Exterior _060313 LIGHTING (EXT) _0295718 REAR COMBINATION LIGHT ASSEMBLY(for Bulb Type) A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY(for Bulb Type)  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 81555H 1.INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE

a.
E351151

Connect the connector.


b.

Engage the clamp to install the rear combination light socket and wire.


Hide 81550L 2.INSTALL REAR TURN SIGNAL LIGHT BULB

a.
E358048C02
0,0 0,0 false
V113147

Install in this Direction


Install the rear turn signal light bulb to the rear combination light socket and wire.


b.
E351195C01
0,0 0,0 false
V113147

Install in this Direction


Turn the rear combination light socket and wire with the rear turn signal light bulb as shown in the illustration to connect them as a unit.


Hide 81536A 3.INSTALL REAR COMBINATION LIGHT LED

a.
E351194C01
0,0 0,0 false
V113147

Install in this Direction


Turn the rear combination light LED as shown in the illustration to install it.


b.

Install the screw.


c.

Connect the connector.