Home › Vehicle Exterior › WINDOW / GLASS › WINDSHIELD DEICER SYSTEM
RM32H0E _59 Vehicle Exterior _060314 WINDOW / GLASS _0295730 WINDSHIELD DEICER SYSTEM U

WINDOW / GLASS  WINDSHIELD DEICER SYSTEM  TERMINALS OF ECU  


CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY


E358496E02
2.406,0.156 2.813,0.385 0.406,0.229 2.479,0.188 2.938,0.385 0.458,0.198 10 false F72

a.

Disconnect the F72 air conditioning amplifier assembly connector.


b.

Measure the voltage and resistance according to the value(s) in the table below.

Tester Connection Wiring Color Terminal Description Condition Specified Condition
F72-5 (IG+) - Body ground B - Body ground Power source (IG) Ignition switch ON 11 to 14 V
Ignition switch off Below 1 V
F72-1 (B) - Body ground V - Body ground Battery power supply Always 11 to 14 V
F72-29 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω


c.

Reconnect the F72 air conditioning amplifier assembly connector.


d.

Measure the voltage according to the value(s) in the table below.

Tester Connection Wiring Color Terminal Description Condition Specified Condition
F72-24 (FDEF) - Body ground W - Body ground Wiper deicer signal Ignition switch ON, windshield deicer switch on Below 1 V
Ignition switch ON, windshield deicer switch off 11 to 14 V
F72-3 (LIN1) - Body ground L - Body ground LIN communication line Ignition switch ON Pulse generation



CHECK AIR CONDITIONING CONTROL ASSEMBLY


E358495E03
3.281,0.188 3.74,0.438 0.458,0.25 3.385,0.229 3.844,0.427 0.458,0.198 10 false F61

a.

Check for pulse according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
F61-2 (LIN1) - F61-16 (GND) L - W-B LIN communication line Ignition switch ON Pulse generation