GENERAL
The cruise control system is controlled by the ECM, and vehicle speed control is performed using the throttle body with motor assembly. The ECM controls the following functions: ON/OFF, - (COAST)/SET, + (ACCEL)/RES (RESUME), CANCEL, vehicle speed operation and shift down control.
The ECM compares the vehicle speed from the speed sensors with the stored vehicle speed set using the cruise control main switch. The ECM increases the opening angle of the throttle valve when the actual vehicle speed is below the stored vehicle speed, and decreases the opening angle of the throttle body when the actual vehicle speed is more than the stored vehicle speed.
The ECM receives signals such as ON/OFF, - (COAST)/SET, + (ACCEL)/RES (RESUME), and CANCEL signals from the cruise control main switch.
The ECM illuminates the cruise control indicator in the combination meter assembly when the cruise control system is turned on using the cruise control main switch (ON/OFF button).
The ECM turns off the cruise control indicator in the combination meter assembly and displays a warning message if a malfunction is detected when the cruise control system is controlling vehicle speed.
| *1 | Cruise Control Indicator |
| *2 | Cruise Control SET Indicator |
The ECM illuminates the cruise control SET indicator in the combination meter assembly when vehicle speed control begins after the cruise control main switch is pushed to -SET while driving. Also, the ECM displays the current set speed on the multi-information display when the cruise control main switch is pushed to +RES or -SET.
FUNCTION OF MAIN COMPONENTS
The main components of the cruise control system have the following functions:
| Component | Function | |
|---|---|---|
| Cruise Control Main Switch | ON/OFF Button | Turns the cruise control system on and off. |
| CANCEL Switch | A cancel signal is sent to the ECM when the switch is operated. | |
| +RES Switch | Acceleration and stored speed resume signals are sent to the ECM when the switch is operated. | |
| -SET Switch | Deceleration and vehicle speed setting signals are sent to the ECM when the switch is operated. | |
| Skid Control ECU | ·
Sends VSC operation signals to the ECM. ·
Sends TRC operation signals to the ECM. ·
Sends signals such as wheel speed and estimated vehicle acceleration signals to the ECM. |
|
| ECM | Controls all functions of the cruise control system in accordance with the signals received from switches, sensors and ECUs. | |
| Combination Meter Assembly | Cruise Control Indicator | ·
Illuminates based on signals from the ECM when the cruise control system is turned on using the cruise control main switch (ON/OFF button). ·
Turns off based on signals from the ECM when a malfunction is detected in the cruise control system. |
| Cruise Control SET Indicator | Illuminates when the vehicle speed is set. | |
| Multi-information Display | ·
Displays warning messages to alert the driver. ·
Displays the current set speed. |
|
| Throttle with Motor Body Assembly | Throttle Control Motor | Adjusts the throttle valve opening angle in accordance with signals received from the ECM. |
| Throttle Position Sensor | Outputs the throttle valve opening angle to the ECM. | |
| Speed Sensor | Outputs wheel speed signals to the skid control ECU. | |
| Accelerator Pedal Sensor Assembly | Outputs accelerator pedal depression angle to the ECM. | |
| Park/Neutral Position Switch Assembly*1 | Outputs the shift lever position to the ECM. | |
| Clutch Pedal Stroke Sensor Assembly*2 | Detects the depressing of the clutch pedal and transmits a signal to the ECM. | |
| VSC OFF Switch | Outputs VSC off signals to the skid control ECU. | |
| Stop Light Switch Assembly | Outputs brake pedal depressed signals to the ECM. | |
*1: for CVT
*2: for Manual Transaxle
OPERATION OF CRUISE CONTROL
The cruise control system has the following control functions: