Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM (for 8NR-FTS)
RM32H0E _51 Engine / Hybrid System _059516 CRUISE CONTROL _0297888 CRUISE CONTROL SYSTEM(for 8NR-FTS) D

CRUISE CONTROL  CRUISE CONTROL SYSTEM(for 8NR-FTS)  DIAGNOSIS SYSTEM  


DESCRIPTION


The ECM controls the cruise control system of the vehicle. The data and DTCs relating to the cruise control system can be read from the DLC3 of the vehicle. Use the GTS to check and solve the problem.

HINT:

If a vehicle speed sensor, stop light switch assembly or any other related part malfunctions, the ECM cancels control of vehicle speed automatically.


a.

Check the battery voltage.

Standard Voltage:

11 to 14 V


If the voltage is below 11 V, replace or recharge the battery before proceeding to the next step.




CHECK INDICATOR


a.

Turn the ignition switch ON.


b.
A222996C03
1.268,0.529 1.475,0.737 0.207,0.207 10 *1
*1 Cruise Control Indicator


Check that the cruise control indicator illuminates when the cruise control system is turned on using the cruise control main switch (ON/OFF button), and that the indicator turns off when the cruise control system is turned off using the cruise control main switch (ON/OFF button).

If the result is not as specified, perform the Cruise Main Indicator Light Circuit (cruise control indicator) inspection procedure.

Click hereEngine / Hybrid System>CRUISE CONTROL>CRUISE CONTROL SYSTEM (for 8NR-FTS)>Cruise Main Indicator Light Circuit

HINT:

While driving with the cruise control system controlling vehicle speed, the ECM will automatically cancel control of vehicle speed by the cruise control system when a malfunction occurs in one of the following: vehicle speed sensors, stop light switch assembly, or other related parts. When control of vehicle speed by the cruise control system is automatically canceled, the cruise control indicator turns off and a warning message is displayed. At the same time, a DTC is stored.