Home › Vehicle Interior › LIGHTING (INT) › LIGHTING SYSTEM
RM32H0E _58 Vehicle Interior _060018 LIGHTING (INT) _0298022 LIGHTING SYSTEM D

LIGHTING (INT)  LIGHTING SYSTEM  SYSTEM DESCRIPTION  


ILLUMINATED ENTRY SYSTEM


a.

The illuminated entry system has the following control functions:

Control Outline Lights that Operate
Actuation Area-linked*1 When a registered key is brought within any vehicle exterior detection area around the doors, the items listed to the right turn on.
·

Map Light Assembly

·

No. 1 Room Light Assembly


Door Lock/Unlock-linked When any door is unlocked, the lights that operate turn on.
·

Map Light Assembly

·

No. 1 Room Light Assembly

·

No. 1 Interior Illumination Light Assembly (Door Ambient Illumination Light)*3

·

Instrument Cluster Finish Panel Garnish (Cup Holder Illumination Light)*3


When the all doors is locked, the lights that operate turn off.
Door Open/Close-linked When any door is opened, the lights that operate turn on.
·

Map Light Assembly

·

No. 1 Room Light Assembly

·

No. 1 Interior Illumination Light Assembly (Door Ambient Illumination Light)*3

·

Instrument Cluster Finish Panel Garnish (Cup Holder Illumination Light)*3

·

Engine Switch Illumination*1


When the ignition switch is turned to ACC or ON and all doors are closed, the lights that operate turn off.
·

Map Light Assembly

·

No. 1 Room Light Assembly


Engine Switch-linked*1 When the engine switch is turned from on (ACC or IG) to off, the lights that operate turn on.
·

Map Light Assembly

·

No. 1 Room Light Assembly


Ignition Switch-linked*2 When the ignition switch is turned from ACC or ON to off, the lights that operate turn on.
·

Map Light Assembly

·

No. 1 Room Light Assembly


Shift Position-linked*3, *4 When the shift lever is moved from P to any other position, the lights that operate dim.
·

No. 1 Interior Illumination Light Assembly (Door Ambient Illumination Light)*3

·

Instrument Cluster Finish Panel Garnish (Cup Holder Illumination Light)*3


Vehicle Speed-linked *3, *5 When the parking brake is OFF and the vehicle speed is at least 3 km/h (1.9 mph), the lights dim.
·

No. 1 Interior Illumination Light Assembly (Door Ambient Illumination Light)*3

·

Instrument Cluster Finish Panel Garnish (Cup Holder Illumination Light)*3


Delay When approximately 15 seconds elapse after the following condition is met, the lights that operate turn off (*1):
·

An actuation area-linked function is used.


·

Map Light Assembly

·

No. 1 Room Light Assembly


When approximately 15 seconds elapse after the following condition is met, the lights that operate turn off:
·

An engine switch-linked function is used.*1

·

An ignition switch-linked function is used.*2


·

Map Light Assembly

·

No. 1 Room Light Assembly

·

No. 1 Interior Illumination Light Assembly (Door Ambient Illumination Light)*3

·

Instrument Cluster Finish Panel Garnish (Cup Holder Illumination Light)*3


When approximately 15 seconds elapse after either of the following conditions is met, the lights that operate turn off:
·

The door unlock-linked function is active.

·

Any door is opened and then all doors are closed when the ignition switch is off.


·

Map Light Assembly

·

No. 1 Room Light Assembly

·

No. 1 Interior Illumination Light Assembly (Door Ambient Illumination Light)*3

·

Instrument Cluster Finish Panel Garnish (Cup Holder Illumination Light)*3



*1: w/ Entry and Start System

*2: w/o Entry and Start System

*3: w/ Door Ambient Illumination Light

*4: for CVT

*5: for Manual Transaxle




BATTERY SAVING CONTROL SYSTEM


a.

The battery saving control system has the following control functions:

Control Outline Lights that Operate
Basic function When 20 minutes elapse after the ignition switch is turned from ACC or ON to off and the lights that operate remain on, the lights are turned off.
HINT:

Battery saving control is canceled when any of the following operations is performed before the lights are turned off by battery saving control. After the operation is performed, the lights remain on for another 20 minutes and then the lights are turned off.

·

The ignition switch is turned to ACC or ON.

·

Any door is opened and closed.

·

The luggage compartment door is opened and closed.

·

Any door is unlocked.

·

The key enters any exterior actuation area.



·

Map Light Assembly

·

No. 1 Room Light Assembly

·

No. 1 Interior Illumination Light Assembly (Door Ambient Illumination Light)*1

·

Instrument Cluster Finish Panel Garnish (Cup Holder Illumination Light)*1

·

Engine Switch Illumination*2


Interior light auto cut function When 20 minutes elapse after the ignition switch is turned from ACC or ON to off and the lights that operate remain on, the lights are turned off.
HINT:

Battery saving control is canceled when any of the following operations is performed before the lights are turned off by battery saving control. After the operation is performed, the lights remain on for another 20 minutes and then the lights are turned off.

·

The ignition switch is turned to ACC or ON.



·

Map Light Assembly

·

No. 1 Room Light Assembly

·

No. 1 Luggage Compartment Light Assembly

·

Vanity Light Assembly



*1: w/ Door Ambient Illumination Light

*2: w/ Entry and Start System