Home › Audio / Visual / Telematics › AUDIO / VIDEO › INSTRUMENT PANEL SPEAKER
RM32H0E _56 Audio / Visual / Telematics _060227 AUDIO / VIDEO _0298053 INSTRUMENT PANEL SPEAKER G

AUDIO / VIDEO  INSTRUMENT PANEL SPEAKER  INSPECTION  


PROCEDURE

Hide 86160P 1.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY (w/ Woofer)

a.

Check the resistance.

i.
E359071C02
1.021,0.938 1.51,1.104 true 1.917,1.115 2.417,1.01 true 0.146,0.135 0.458,0.292 0.313,0.156 10 false *a 0.844,0.844 0.969,1.042 0.125,0.198 10 false + 2.521,0.906 2.646,1.104 0.125,0.198 10 false -
*a Component without harness connected
(Front No. 2 Speaker Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 (+) - 1 (-) Always 6.8 to 10.2 Ω


If the result is not as specified, replace the front No. 2 speaker assembly.



Hide 86160P 2.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY (w/o Woofer)

a.

Check the resistance.

i.
E226097C82
1,2.333 1.344,1.792 true 1.583,2.333 1.667,1.813 true 2.083,2.333 1.948,1.802 true 2.667,2.333 2.271,1.802 true 0.167,0.083 0.479,0.281 0.313,0.198 10 false *a 0.708,2.344 1.365,2.583 0.656,0.24 10 false TWR+*A 1.542,2.344 1.854,2.542 0.313,0.198 10 false + 1.875,2.344 2.531,2.563 0.656,0.219 10 false TWR-*A 2.667,2.344 2.979,2.542 0.313,0.198 10 false - 0.708,2.531 1.365,2.771 0.656,0.24 10 false TWL+*B 1.875,2.531 2.531,2.75 0.656,0.219 10 false TWL-*B
*A for RH
*B for LH
*a Component without harness connected
(Front No. 2 Speaker Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
for RH
Tester Connection Condition Specified Condition
4 (TWR+) - 2 (TWR-) Always 10 kΩ or higher
1 (-) - 2 (TWR-) Always Below 1 Ω
3 (+) - 4 (TWR+) Always Below 1 Ω

for LH
Tester Connection Condition Specified Condition
4 (TWL+) - 2 (TWL-) Always 10 kΩ or higher
1 (-) - 2 (TWL-) Always Below 1 Ω
3 (+) - 4 (TWL+) Always Below 1 Ω


If the result is not as specified, replace the front No. 2 speaker assembly.