Home › Audio / Visual / Telematics › AUDIO / VIDEO › WINDOW GLASS ANTENNA WIRE
RM32H0E _56 Audio / Visual / Telematics _060227 AUDIO / VIDEO _0298058 WINDOW GLASS ANTENNA WIRE G

AUDIO / VIDEO  WINDOW GLASS ANTENNA WIRE  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT WINDOW GLASS ANTENNA WIRE

a.
E111994C19
0.531,0.833 0.604,1.156 false 0.969,1.635 1.042,1.969 false 2.188,1.385 2.271,1.719 false 0.385,0.656 0.833,0.927 0.448,0.271 10 false *a 0.979,1.979 1.375,2.271 0.396,0.292 10 false *b 2.208,1.719 2.677,2 0.469,0.281 10 false *c
*a Tester Probe
*b Antenna Wire
*c Tin Foil


Check for continuity of the antenna.

HINT:

Check for continuity at the center of each antenna wire as shown in the illustration.


NOTICE:
·

When cleaning the glass, wipe it in the direction of the wire with a soft dry cloth. Take care not to damage the wire. Do not use detergents or glass cleaners with abrasive ingredients.

·

When measuring resistance, wrap a piece of tin foil around the tip of the negative probe and press the foil against the wire with your finger, as shown in the illustration.



OK:

There is continuity in the antenna.


If the result is not as specified, repair the window glass antenna wire.