Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER › 2016.10–2019.09
RM32H0E _59 Vehicle Exterior _060783 EXTERIOR PANELS / TRIM _0298065 REAR BUMPER A

EXTERIOR PANELS / TRIM  REAR BUMPER  INSTALLATION  


PROCEDURE

Hide 1.INSTALL REAR BUMPER ASSEMBLY

a.
B458905C01
1.563,0.26 1.813,0.448 0.25,0.188 12 true *A
*A w/ Wire Harness
V113147

Install in the Direction


Install the rear bumper assembly.


b.

w/ Wire Harness:

i.

Connect the connector.



c.

Engage the claws as shown in the illustration.


d.
B458906C01
0,0 0,0 false
V113147

Install in the Direction


Engage the claws as shown in the illustration.

HINT:

Use the same procedure for the RH side and LH side.



e.

Install the bolt.

HINT:

Use the same procedure for the RH side and LH side.



f.

Install the rear bumper upper cover LH.

HINT:

Use the same procedure as for the LH side.



g.

Install the rear bumper assembly with the 4 clips.


Hide 75652 2.INSTALL QUARTER OUTSIDE MOULDING LH

a.

Engage the claws to install the quarter outside moulding LH.


b.

Install the 2 screws.


Hide 75651 3.INSTALL QUARTER OUTSIDE MOULDING RH

HINT:

Use the same procedure as for the LH side.


Hide 52592 4.INSTALL REAR BUMPER SIDE SEAL LH

a.

Install the rear bumper side seal LH with the 6 clips.


Hide 52591 5.INSTALL REAR BUMPER SIDE SEAL RH

HINT:

Use the same procedure as for the LH side.