Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › NAME PLATE › 2016.10–2020.12
RM32H0E _59 Vehicle Exterior _060783 EXTERIOR PANELS / TRIM _0298067 NAME PLATE A

EXTERIOR PANELS / TRIM  NAME PLATE  REMOVAL  


CAUTION / NOTICE / HINT

HINT:

When removing the name plates, heat the vehicle body, back door outside garnish and name plates using a heat light.


Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
·

Back Door Outside Garnish

·

Name Plate


20 to 30°C (68 to 86°F)

CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts, touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



NOTICE:

Do not heat the vehicle body, back door outside garnish or name plate excessively.


PROCEDURE

Hide 75442A 1.REMOVE NO. 2 BACK DOOR NAME PLATE

a.
B458669C01
1.625,1.5 2.896,1.323 true 2.708,0.646 3.052,0.646 true 3.094,0.531 3.344,0.75 0.25,0.219 10 true *a 2.948,1.198 3.177,1.385 0.229,0.188 10 true *b
*a Wooden Block
*b Piano Wire
V100155

Protective Tape


Apply protective tape around the No. 2 back door name plate as shown in the illustration.


b.

Insert a piano wire between the back door outside garnish and No. 2 back door name plate.


c.

Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.


d.

Pull the piano wire and cut the double-sided tape that holds the No. 2 back door name plate to the back door outside garnish to remove the No. 2 back door name plate.

NOTICE:

Be careful not to damage the back door outside garnish.



e.

Remove the protective tape.


Hide 75441E 2.REMOVE NO. 1 BACK DOOR NAME PLATE

a.
B458674C01
2.729,0.583 3.094,0.542 true 1.979,1.365 2.781,1.021 true 3.135,0.427 3.375,0.625 0.24,0.198 10 true *a 2.823,0.885 3.063,1.083 0.24,0.198 10 true *b
*a Wooden Block
*b Piano Wire
V100155

Protective Tape


Apply protective tape around the No. 1 back door name plate as shown in the illustration.


b.

Insert a piano wire between the back door outside garnish and No. 1 back door name plate.


c.

Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.


d.

Pull the piano wire and cut the double-sided tape that holds the No. 1 back door name plate to the back door outside garnish to remove the No. 1 back door name plate.

NOTICE:

Be careful not to damage the back door outside garnish.



e.

Remove the protective tape.


Hide 75444A 3.REMOVE NO. 4 BACK DOOR NAME PLATE (for AWD)

a.
B458668C01
2.74,0.542 3.042,0.542 true 1.948,1.333 3.01,0.917 true 3.104,0.448 3.417,0.604 0.313,0.156 10 false *a 3.073,0.823 3.385,0.979 0.313,0.156 10 false *b
*a Wooden Block
*b Piano Wire
V100155

Protective Tape


Apply protective tape around the No. 4 back door name plate as shown in the illustration.


b.

Insert a piano wire between the vehicle body and No. 4 back door name plate.


c.

Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.


d.

Pull the piano wire and cut the double-sided tape that holds the No. 4 back door name plate to the vehicle body to remove the No. 4 back door name plate.

NOTICE:

Be careful not to damage the vehicle body.



e.

Remove the protective tape.


Hide 75431A 4.REMOVE NO. 1 BACK DOOR EMBLEM

a.
B458667C01
0.677,3.99 0.938,3.583 true 2.75,4.135 2.438,3.781 true 0.573,3.99 0.813,4.198 0.24,0.208 10 false *a 2.719,4.156 2.958,4.365 0.24,0.208 10 false *a
*a Location Pin
V100155

Protective Tape


Apply protective tape around the No. 1 back door emblem as shown in the illustration.


b.

Using a moulding remover D, separate the double-sided tape and disengage the location pins to remove the No. 1 back door emblem.

NOTICE:

Be careful not to damage the back door outside garnish.



c.

Remove the protective tape.