Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROCKER PANEL MOULDING
RM32H0E _59 Vehicle Exterior _060783 EXTERIOR PANELS / TRIM _0298070 ROCKER PANEL MOULDING A

EXTERIOR PANELS / TRIM  ROCKER PANEL MOULDING  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 75852 1.INSTALL ROCKER PANEL MOULDING

a.

Engage the clips to install the rocker panel moulding as shown in the illustration.

B465627C01
0,0 0,0 false
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)



b.
B465434C01
0,0 0,0 false
V113147

Install in this Direction


Engage the claw to connect the quarter outside moulding LH as shown in the illustration.


c.

Install the 5 screws.


d.

Install the 8 new clips.


e.

Remove the protective tape.


Hide 65632D 2.INSTALL REAR WHEEL HOUSE FRONT PLATE