Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BACK DOOR OUTSIDE GARNISH › 2016.10–2019.09
RM32H0E _59 Vehicle Exterior _060783 EXTERIOR PANELS / TRIM _0298075 BACK DOOR OUTSIDE GARNISH A

EXTERIOR PANELS / TRIM  BACK DOOR OUTSIDE GARNISH  INSTALLATION  


PROCEDURE

Hide 76827A 1.INSTALL NO. 2 BACK DOOR GARNISH RETAINER (w/o Rear View Monitor System)

a.
B458767C01
0,0 0,0 false
V113147

Install in this Direction


Engage the claws to install the No. 2 back door garnish retainer as shown in the illustration.


Hide 2.INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

a.

Remove the release paper from the back door outside garnish seal.


b.
B465622C01
0,0 0,0 false
V113147

Install in this Direction


Engage the clips to install the back door garnish as shown in the illustration.


c.

Install the 4 bolts.

Torque:
4.9 N*m (50 kgf*cm, 43 in.*lbf)


Hide 64780A 3.INSTALL BACK DOOR TRIM PANEL ASSEMBLY

Hide 67938A 4.INSTALL BACK DOOR SIDE GARNISH LH

Hide 67937B 5.INSTALL BACK DOOR SIDE GARNISH RH

HINT:

Use the same procedure as for the LH side.


Hide 64790B 6.INSTALL BACK DOOR TRIM UPPER PANEL ASSEMBLY

Hide 64910J 7.INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

Hide 64330D 8.INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Package Tray Trim)