Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT DOOR OUTSIDE MOULDING
RM32H0E _59 Vehicle Exterior _060783 EXTERIOR PANELS / TRIM _0298081 FRONT DOOR OUTSIDE MOULDING A

EXTERIOR PANELS / TRIM  FRONT DOOR OUTSIDE MOULDING  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedures listed below are for the LH side.



PROCEDURE

Hide 75732A 1.INSTALL FRONT DOOR OUTSIDE MOULDING

a.

Remove the peeling paper from the face of the outside moulding retainer.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



b.
B458721C01
0,0 0,0 false
V113147

Remove in this Direction


Engage the clips to install the front door outside moulding as shown in the illustration.


c.

Remove the protective tape.


d.

Install the gasket and nut.


e.

Install the hole cover.