Home › Vehicle Exterior › WIPER / WASHER › REAR WIPER MOTOR
RM32H0E _59 Vehicle Exterior _060316 WIPER / WASHER _0298087 REAR WIPER MOTOR A

WIPER / WASHER  REAR WIPER MOTOR  REMOVAL  


PROCEDURE

Hide 64790B 1.REMOVE BACK DOOR TRIM UPPER PANEL ASSEMBLY

Hide 67938A 2.REMOVE BACK DOOR SIDE GARNISH LH

Hide 67937B 3.REMOVE BACK DOOR SIDE GARNISH RH

HINT:

Use the same procedure as for the LH side.


Hide 64780A 4.REMOVE BACK DOOR TRIM PANEL ASSEMBLY

Hide 5.REMOVE REAR WIPER ARM AND BLADE ASSEMBLY

a.
E356880

Slide the rear wiper arm head cap as shown in the illustration to disengage the claws.


b.
E356881C01
0,0 0,0 false
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


Disengage the claws and guides to remove the rear wiper arm head cap as shown in the illustration.


c.
E356882

Remove the nut and rear wiper arm and blade assembly.


Hide 85143R 6.REMOVE REAR WIPER MOTOR GROMMET

a.
E356883

Remove the rear wiper motor grommet.


Hide 85110R 7.REMOVE REAR WIPER MOTOR ASSEMBLY

a.
E356884

Disconnect the connector.


b.

Remove the 2 bolts.


c.

Loosen the bolt to remove the rear wiper motor assembly.

HINT:

Remove the bolt and rear wiper motor assembly as a set.